| dc.contributor.advisor |
Steele, Gerald L. (Gerald Lee), 1928- |
en_US |
| dc.contributor.author |
Holland, Edward, 1947- |
en_US |
| dc.date.accessioned |
2011-06-03T19:30:24Z |
|
| dc.date.available |
2011-06-03T19:30:24Z |
|
| dc.date.created |
1970 |
en_US |
| dc.date.issued |
1970 |
|
| dc.identifier |
LD2489.Z72 1970 .H65 |
en_US |
| dc.identifier.uri |
http://cardinalscholar.bsu.edu/handle/handle/180097 |
|
| dc.description.abstract |
This creative project was undertaken to determine the effectiveness and possible usefulness of a small, laboratory sized plastic blow molder. The design of this machine was similar to those units used in industry but fabricated on a much smaller scale.The blow molder was of the vertical extrusion type. It was actuated by a hydraulic cylinder, and the plastic was melted by means of electric heating bands.The extruded plastic parison was formed by two matching mold halves, and air introduced through a needle valve to expand the hot plastic to the shape of the mold cavity. |
|
| dc.format.extent |
45 leaves : ill. ; 28 cm. |
en_US |
| dc.source |
Virtual Press |
en_US |
| dc.subject.lcsh |
Plastics -- Molding. |
en_US |
| dc.title |
The design and construction of a laboratory sized plastic blow molder : a creative project |
en_US |
| dc.description.degree |
Thesis (M.A.) |
|
| dc.identifier.cardcat-url |
http://liblink.bsu.edu/catkey/415643 |
en_US |